5. Loosen the angle adjustment screw on the base to adjust the angle of the
camera. After the camera is adjusted to the proper angle, re-tighten the angle
adjustment screw.
(1) Rotate the adjustable rod (0°–360° adjustable).
(2) Adjust the position of the ball joint (0°–360° pan and 0°–90° tilt).
Notes:
Angle
Adjustment
Screw
Base
Rod
Ball joint
According to actual needs, the camera antenna angle can be adjusted to
obtain a better signal.
When installing the camera, place the speaker downwards to avoid water
accumulation in the sound cavity of the speaker after rainy weather, which
might affect the sound effect.
To avoid water ingress, please tighten the protective cover of the microSD
card slot with with a screwdriver before use.
•
•
•
7
To Next Page
Loading...
Need help?
General
