Xiaomi Mi Cordless Screwdriver - Troubleshooting; Specifications

Screwdriver stops rotating
during use
Issue
Screwdriver doesn't work
Possible Causes Solution
ChargingLithium-ion baery
is depleted
Lithium-ion baery
is depleted
Charging
Use the appropriate bitBit cannot be installed
Bit size does not match
the size of the bit holder
Troubleshooting
04 Specifications
Model: MJDDLSD001QW
Input: 5 V 1 A
Rated Voltage: 3.6 V
Screwdriver Net Weight: 350 g
Screwdriver Dimensions: 124×130.5×42 mm
Color: Black
Rated Capacity: 2 Ah
Baery Type: Lithium-ion baery
Rotational Speed: 200 /min
Max. Torque: 5 N·m
Charging Time: 120–180 min
Bit Size: C6.3 × 25 mm
Phillips-head: PH1/PH2/PH3
Allen: H3/H4/H5
Standard: SL4/SL6
Torx: T15/T20/T25
Pozidriv: PZ2
Extension Bit Holder: 60 mm
Screwdriver does not
work when pressing and
holding the start buon
Adjust the direction
knob according to your
needs
Direction knob is in the
neutral position
Check whether the
charging indicator is on,
and use the included
charging cable
The USB cable is not
plugged in or the
included charging cable
is not being used
Baery cannot be charged
8
Declaration of the noise emission values according to EN 62841
(considered uncertainty 5dB(A))
Sound pressure level: 57.9 dB(A)
Sound power level: 68.9 dB(A)
Declaration of the vibration emission according to EN 62841
(considered uncertainty 1.5m/s²): 0.018m/s²
Operating Temperature: 4°C to 40°C
Charging Temperature: 5°C to 40°C
Storage Temperature: -10°C to 45°C