1. It is normal for the skin to be slightly irritated after the first few shaves.
It is recommended to regularly use the shaver (at least 3 times a week)
for 3 weeks to allow the skin to adapt as quickly as possible.
2. Apply gentle pressure while shaving your face in circular motions. It is
not necessary to repeatedly shave the same area to achieve a clean
shave (shave dry for an optimal result).
How to Use
04
Switching mode
Press the start/stop button.
Operating the shaver
When the shaver is started, press the mode button to cycle through the
modes of low speed, medium speed, and high speed. Once a mode is
selected, its indicator will be on.
When the shaver is stopped, you can still press the mode button to
cycle through the modes, and the indicator for the selected mode will
remain on for 5 seconds and then go off. After the shaver is started, it
will operate in the mode that you selected when the shaver was stopped.
Note: If the mode is not changed when the shaver is stopped, the next
time the shaver is started, it is set to the mode that was used before it
was stopped.
Note: Improper use of the shaver can easily cause damage to the shaving
head and the blade meshes. Please check whether the shaving head and
the blade meshes are intact before use. Immediately stop using the
shaver if the shaving head or the blade meshes are damaged.
To Next Page
Loading...
Need help?
General
