14
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app
displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the
current app version.
Apple HomeKit Smart Control
1. Open the Home app on your iPhone or iPad.
2. Tap "Add Accessories" and follow the instructions to scan the QR code either on
the back cover of the user manual or on the junction box, or enter the 8-digit setup
code above the QR code to grant the Apple Home app access.
* Make sure a Wi-Fi network with Internet access is available (this product does not support 5 GHz
networks).
To control this HomeKit-compatible accessory, it is recommended that you use iOS 9.0 or above.
The HomeKit setup code is in the user manual and on the junction box, do not lose it.
HomeKit setup code again.
In case the user manual is lost, remove the lampshade and scan the QR code or enter the setup code
on the junction box.
iPad and iPhone are the trademarks of Apple Inc., and they are registered in the United States and
other countries.
EN
To Next Page
