Xiaomi Mi Smart Projector 2 User Manual

3
Preventing Electric Shocks and Fire Hazards:
Safety Precautions:
- Only use the provided genuine power adapter.
- Unplug the projector from the electrical outlet during thunderstorms or when it is not being used for a long time, so as to avoid
damage caused by a power surge or lightning strike.
- Do not place any flammable objects near this projector so as to avoid fire.
- Do not block any of the vents as this may cause heat build-up inside the projector, and possibly result in a fire.
- Do not block the lens when the projector is turned on. Any object placed close to the lens may get very hot and/or deformed, and may
even cause a fire.
-
Do not place this projector on an unstable platform, stand or table so as to prevent it from falling and causing serious damage or personal injury.
- Do not look directly into the lens when the projector is turned on to avoid eye damage.
- Do not attempt to disassemble this projector as it may contain dangerous high voltage components. This projector must only be
maintained and repaired by a qualified or authorized technician.
- Do not expose this projector to rain or moisture (operating humidity is 20%–80%).
- Do not immerse this projector in, nor expose it to water or other liquids. Immediately unplug the projector if any liquid or object got
into its housing, and have it checked by a qualified technician before using it again.
- Do not place this projector in any of the following environments:
• In poorly ventilated or narrow spaces.
• Near devices that produce a strong magnetic field.
• In direct sunlight.
• In extremely hot, cold or humid environments.
• Close to a fire alarm.

Xiaomi Mi Smart Projector 2 Specifications

General

Projection distance	1.6 - 3.2 m
Projection technology	DLP
Contrast ratio (typical)	-
Screen size compatibility	60 - 120 \
Projector native resolution	1080p (1920x1080)
Focus	Auto
Throw ratio	1.2:1
Light source type	LED
Service life of light source	- h
Supported video modes	1080p
DVI port	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	5.0
Noise level	28 dB
RMS rated power	10 W
Number of built-in speakers	2
Product type	Standard throw projector
Product color	Black, White
Market positioning	Home cinema
Power source	AC
AC adapter output voltage	19 V
Power consumption (standby)	0.5 W
Power consumption (typical)	65 W
Storage temperature (T-T)	-20 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Harmonized System (HS) code	85286200

Weight and Dimensions

Depth	150 mm
Width	115 mm
Weight	1300 g