Xiaomi Redmi Note 2 - User Manual

Thank you for choosing Redmi Note 2
To activate the smartphone, press the power
button, which is located on the right side, and
hold it for a few seconds. Then follow the setup
instructions of your smartphone.
More information
To get more information visit xiaomi-mi.com
MIUI
Mi4c is equipped with an operating system, a
collection of a variety of useful applications and
features. It was created with the millions of fans.
For information visit www.miui.com/features.php
VIP users
Visit uvip.xiaomi.cn for your authorization as a
Volume buttons
On/Off button
Tasks Back
VIP user and enjoy all the special benets
and services.
Security: To update the phone system,
please contact the individual ofcial local Mi
afliates or use self-updating feature of Mi
phone.
Scan QR code for ROM and instructions.
http://xiaomi-mi.com
1. Remove a battery.
2. Insert SIM-card(s) into special slots.
3. Place an SD-card into the slot.
4. Set the battery.
5. Switch the phone on.
Inserting of SIM card
Audio 3.5 mm port
Camera
Home
USB port
XIAOMI-MI.COM

Xiaomi Redmi Note 2 Specifications

General

Processor	MediaTek MT6795 Helio X10
CPU	Octa-core 2.0 GHz Cortex-A53
GPU	PowerVR G6200
RAM	2 GB
Internal Storage	16 GB / 32 GB
Rear Camera	13 MP, f/2.2, PDAF
Front Camera	5 MP, f/2.0
SIM	Dual SIM (Micro-SIM, dual stand-by)
Dimensions	152 x 76 x 8.3 mm (5.98 x 2.99 x 0.33 in)
Weight	160 g (5.64 oz)
Network	GSM / HSPA / LTE
Colors	White, Blue, Yellow, Pink, Mint green
Display	5.5 inches, 1080 x 1920 pixels
Battery	3060 mAh
Operating System	Android 5.0 (Lollipop), MIUI 7