6
Wi-Fi Indicator Status Description
Heater Status Wi-Fi Indicator Status
Awaiting connection
Network connected successfully
Reconnecting automatically after
a disconnection
Updating the firmware
Network connection function
disabled
Blinking slowly (on for 0.2 seconds, then off for 0.8
seconds, repeatedly)
Blinking quickly (on for 0.1 seconds, then off for 0.2 seconds,
repeatedly)
Blinking (on for 0.05 seconds then off for 0.1 seconds, and
on for 0.05 seconds then off for 0.8 seconds, repeatedly)
Off
On
Care & Maintenance
• Before cleaning the heater, turn it off and unplug it and wait for it to cool down completely.
• Use a clean, soft, and damp cloth to wipe the heater. Do not drip water into the heater during cleaning.
• Do not disassemble the heater during care and maintenance.
• After cleaning, ensure the heater is completely dry before using or storing it.
• Avoid bumping or scratching the heater to prevent its surface coating from being damaged and rusting.
• When planning not to use the heater for a long time, store the heater in its original packaging in a dry place.
Scan the QR code to download and install the app. You will be
directed to the connection setup page if the app is installed
already. Or search "Mi Home/Xiaomi Home" in the app store to
download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right,
and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except
for Russia). The name of the app displayed on your device
should be taken as the default.
Notes:
• The version of the app might have been updated, please
follow the instructions based on the current app version.
• If you fail to scan the heater's QR code, search for its name
to add it.
This product works with Mi Home/Xiaomi Home app*.
Control your device with Mi Home/Xiaomi Home app.
Connecting with Mi Home/Xiaomi Home App
99EE4FEC
To Next Page
Loading...
Need help?
General
Weight and Dimensions
