2
Instructions for disassembling and assembling bezel
1. Press the edge of the bezel with your index finger and thumb, or press the bezel with your palm, and then turn it
counterclockwise (about 20 degrees) with a gentle force to loosen it.
2. Pinch up and remove the bezel.
3. Match the alignment point inside the replacement bezel with the alignment point of the watch (at 12 o'clock position).
Place the bezel horizontally and fasten it to the watch body.
4. To install the bezel, press the edge of the bezel with your index finger and thumb, or press the bezel with your palm and
turn it clockwise with a gentle force until a "click" is felt when it is installed in place.
Option 1 Option 2
Hollow
alignment
points
Solid
alignment
points
To Next Page
Loading...
