Xiaomi ZI5 - Page 2

XIAOMI-MI.COM
In the following table you will nd general information about a charging
duration. These data may vary depending on the temperature and current
battery status.
• These results obtained under the following conditions: Input 5V / 1A, a
full battery charge. The duration of the battery charge may depend on the
level of residual charge and ambient temperature.
• Note that a total charging time will increase if during the process of
charging you added new batteries.
• It is possible that after a full charge the battery, the LED will light up
again and the unit will start to re-charge it. To determine the overall level
of battery power and cut o󰀨 power supply, the device needs a certain time.
This is not a malfunction of the charger or the rechargeable battery.
Charging of other devices if needed
Toggle the button to Output when using AA rechargeable
batteries, in case of urgent need to recharge other devices.
1. Insert 4 AA batteries (for maximum e󰀩ciency, use a fully
charged batteries. Insu󰀩cient battery charge level can reduce
the output power).
2. LED lights start to ash in succession, pointing to the
normal discharge process.
3. To recharge other devices in case of emergency Battery
Charger supports 5V-500mA output current.
LED indicators
Charging duration
XIAOMI-MI.COM