Xiaomi ZMI 10 User Manual

ZMi 10 power bank
Read the instructions carefully before using the device.
Safety label instructions
Each genuine portable battery has a protective label on the outside of the
package. Please erase a special cover and enter your code at o󰀩cial
website.
The company-manufacturer: LLC «ZMI Electronic Technology»
Address: Jiangsu Province, 159 Cheng Jiang Central Road, A913.
Cautions
• Before using the battery for the rst time, fully charge it.
• When the battery is used, a display of a digital device should light up, this
indicates a correct operation of the device.
• You can select the cable yourself to charge this battery or to charge other
devices.
• If the LED indicators do not light up while charging the digital device, the
battery is completely discharged. Please charge it right away.
• When the digital device is connected to the battery, the charge of this
portable charger is being charged.
• After fully charging the battery, immediately unplug it from a power supply.
• If a short-circuit on the battery output or for other reasons the protection
mode activates (after the LED button is pressed, the indicators do not light),
charge it with external power supplies, and then it will return to normal
operation.
Attention
This device is equipped with a lithium-ion battery. It is strictly forbidden
to disassemble a case of the device, in order to prevent the battery from
breaking.
Strictly prohibited any dismantling, squeezing, puncturing the device; It is
USB port input
USB port output
also forbidden to place it in water, in a re or expose it to a temperature
above 60 ° C (140 ° F).
Charge level indicators
Charge level check
Mode indicators
Mode indicator:
Double-click the charge check button to
turn on the HUB mode. The blue indicator
indicates a successful activation of the HUB
mode, absence of a blue indicator indicates
that the HUB mode is turned o󰀨.
Caution: «Charge level check» button is
not designed to turn the device on / o󰀨. This
device has a function of automatic detection
of charging and discharging, so there is
no need to constantly press the charge
level check button. Two minutes before the
discharge, the charge level indicators turn
o󰀨.

Xiaomi ZMI 10 Specifications

General

Category	Power Bank
Capacity	10000mAh
Battery type	Lithium polymer
Material	Plastic
Input	5V/2A, 9V/2A
Output	9V/2A, 12V/1.5A
Ports	2 USB-A, 1 USB-C
Fast Charging Support	Yes

Summary

Safety Label Instructions

Cautions and Attention

Mode Indicator Function

Double-click button to activate HUB mode; blue indicator confirms activation, absence means it's off.

Device Features

Safety and Performance

Reliable protection system, fast charging technology, wide voltage range, 45W max power.

Compatibility and Quality

Smart USB Control Charge, compatible with various devices; uses LG batteries & Intersil microcircuits.

Specifications

Device Overview and Charging

Charging Status Indicators

Status indicators display charge level during charging; detailed by LED status.

Charging Other Devices

Standard USB Charging

Connect portable digital devices via standard USB cable to charge them.

Advanced Charging Modes

USB-C PD Charging

Supports USB-C PD up to 45W; power consumption is double that of conventional chargers.

USB HUB Mode Operation

Activate by double-pressing charge check button; blue indicator confirms. Exit with single press.

Advanced Connectivity

Simultaneous Device Charging

Charge multiple devices via USB-A ports while charging via USB-C PD.

Warranty Information

Faults and Warranty

List of Device Faults

Covers cracks, LED issues, low battery capacity after full charge, and charging/discharging violations.

Warranty Repair Exclusions

Excludes damage from mishandling, accidents, expiry, force majeure, or non-listed faults.

Toxic and Harmful Substances