Xicom XTU-400K User Manual

XTU-400K
Operation and
Installation Manual
This is a controlled document.
The official version of this document is located
in Xicom Technology Document Control.
Printed copies are for reference only.
3550 Bassett Street
Santa Clara, CA 95054 USA
408-213-3000 Phone •408-213-3001 Fax
www.xicomtech.com
Document Number: MN5-0184-104
Revision: D
Applicable to: 305-0184-104

Xicom XTU-400K Specifications

General

Brand	Xicom
Model	XTU-400K
Category	Amplifier
Language	English

Summary

Safety Information

General Warnings and Cautions

Covers critical hazards like high voltage, RF radiation, and physical dangers.

Safety Symbols and Definitions

Explains hazard warning symbols and their specific meanings.

Unpacking and Installation Procedures

Unpacking and Inspection

Steps for receiving, checking, and inspecting the unit upon arrival.

Mechanical Installation

Waveguide and Power Connections

Operation Procedures

Front Panel Controls and Indicators

Describes the function of buttons, LEDs, and the display on the front panel.

Status and Setup Menus

Guidance on navigating menus to view status and configure settings.

Operating Modes

Communication and Protocol

Communication Parameters

Amplifier Commands and Queries

Preventive Maintenance

Maintenance Requirements

Maintenance Procedures

Technical Specifications

Electrical and Environmental Specifications

Covers frequency, power, gain, and operating environmental conditions.

Mechanical Specifications