Need help?Do you have a question about the XIMEA xiMU MU181CR-ON and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Resolution | 4608 x 3824 |
| Pixel Size | 5.86 µm |
| Interface | USB 3.0 |
| Lens Mount | C-Mount |
| Operating Temperature | 0°C - 40 °C |
| Bit Depth | 8-12 bit |
| Shutter Type | Global Shutter |
| Dimensions | 60 x 60 x 44 mm |
| Dynamic Range | 60 dB |
| Frame Rate | 21.7 Fps |
| Sensor Size | 1" |
Manual purpose, installation, and usage instructions for XIMEA xiMU-Series cameras.
Company overview, history, product spectrum, and divisions.
Company contact information including headquarters, sales, and R&D locations.
Compliance with EC EMC Directive 2014/30/EU for electromagnetic compatibility.
FCC rules compliance for Class A digital devices, stating conditions for operation.
Compliance with Canadian Radio Interference Regulations for radio noise emissions.
Compliance with RoHS Directive 2011/65/EU regarding restriction of hazardous substances.
Compliance with WEEE Directive 2012/19/EU for waste electrical and electronic equipment.
GenICam standard interface for image acquisition and device communication.
Introduction to the xiMU subminiature USB camera family, highlighting key features.
Lists benefits of xiMU cameras, such as size, robustness, and compatibility.
Outlines various applications for xiMU cameras, including dental and robotics.
Details common features across xiMU camera models.
Lists available accessories for both USB2.0 and USB3.1 Gen 1 xiMU camera models.
Detailed specifications for the xiMU USB2.0 camera series.
Lists key sensor features for MU9 models, including binning and skipping.
Details the available lens mount adapters for MU9 cameras.
Information on the MU9 camera connector for USB and IO interface.
Details the MU9 USB 2.0 patch cable and its specifications.
Details the MU-MINIUSB extension board for MU9Px-MH.
Information on the ADPT-MU9P-USB2-UB-V adapter.
Details the CBL-MQSYNC-3M0 sync cable.
Lists standard delivery contents for MU9Px-MH.
Lists standard delivery contents for MU9Px-MH-KIT.
Lists standard delivery contents for MU9Px-MBRD.
Lists standard delivery contents for MU-MINIUSB.
Lists standard delivery contents for ADPT-MU9P-USB2-UB-V.
Detailed specifications for the xiMU USB3.1 Gen 1 camera series.
Presents quantum efficiency curves for the AR1820HS sensor.
Lists key sensor features for MU181 models.
Details the available lens mount adapters for MU181 cameras.
Information on the MU181CR-ON camera connector.
Details the ADPT-MU-FL and ADPT-MU-FV adapters.
Diagram showing IO connection to the camera.
Procedures for inserting and detaching FPC cables.
Details the ADPT-MU-TC-V Type-C adapter.
Refers to ME-ADPT-MU-T section.
Refers to CBL-MQSYNC-3M0 section.
Details flex cables for xiMU models.
Details newer generation FFC cables.
Details the BOB-MQ-FL Break Out Board.
Lists standard delivery contents for MU181CR-ON models.
Lists standard delivery contents for ADPT-MU-FL/ADPT-MU-FV.
Lists standard delivery contents for ADPT-MU-TC-V.
Lists standard delivery contents for ME-ADPT-MU-T kit.
Details transfer modes for MU9 cameras over USB2.0.
Managing bandwidth for USB cameras.
Considerations for using USB hubs with xiMU cameras.
Guidelines for using multiple MU9 cameras.
How to connect and synchronize two MU9 cameras.
Connecting cameras to the PC for acquisition.
Using xiAPI to control synchronized cameras.
Overview of the XIMEA CamTool application.
Instructions for starting and using XIMEA CamTool on macOS.
Details available parameters for xiAPI.
Explanation of auto bandwidth calculation in xiAPI.
Information on programming with the GenICam standard.
Overview of xiCOP for diagnostics and management.
Guidelines for protecting optical components from damage.
Warnings against mechanical stress and mishandling.
Instructions for cleaning cameras and lenses.
Measures to protect against static discharge (ESD).
Special safety rules for board level cameras.
Details the warranty terms and conditions for XIMEA cameras.
Disclaimer of warranty responsibilities.
Lists XIMEA and third-party trademarks.
Provides the standard terms and conditions of XIMEA GmbH.
Copyright notice for the manual's content.
Lists the history of revisions for the manual.
To Next Page
