Need help?Do you have a question about the Xinje VB3-20P7 and is the answer not in the manual?
General| Model | VB3-20P7 |
|---|---|
| Category | DC Drives |
| Input Voltage | 220VAC |
| Output Voltage | 0-220VDC |
| Output Current | 20A |
| Control Mode | PWM control |
| Protection Features | Overcurrent, Overvoltage |
| Operating Temperature | -10 to 50°C |
| Storage Temperature | -20℃~+65℃ |
Details essential safety measures and warnings for the correct and safe installation of the inverter.
Outlines critical safety guidelines and warnings related to the wiring process to prevent electrical hazards.
Explains the procedure for connecting the main power input and output terminals to the inverter.
Covers fundamental settings for inverter operation modes, frequency control, and direction.
Configures how the inverter starts and stops the motor, including DC injection braking and stopping modes.
Defines safety features like overload, over-voltage, and current limiting to protect the motor and inverter.
Configures advanced feedback control systems for precise motor speed regulation using PI adjustment.
Sets parameters for advanced vector control motor operation, including motor characteristics and torque boost.
Provides a guide to identifying common inverter fault codes, their possible causes, and recommended solutions.
Details the procedures for resetting the inverter after a fault condition is cleared, including power cycling.
To Next Page
