Parallel connection normally open contactor
Directly from the contact read state
Parallel connection normally close contactor
Direct read normally closed contact
Pulse rising edge detection parallel connection
Parallel connection of pulse falling edge detection
Series connection of parallel circuit block
Initial logic rising-edge of pulse
Rising edge detection instruction
Falling edge detection instruction
Connecting coil instruction for common serial points
Read normally open contactor, serial connection
Read normally close contactor, serial connection
Read normally open contactor, parallel connection
ON for one scanning period at rising-edge of pulse
ON for one scanning period at falling-edge of pulse
Connecting coil instruction for common serial points
Removal of common serial points
Reset the contactor, clear the current value
To Next Page
Loading...