Default value is 77（Octonary）
O Mapping
Output terminal 0 correspond to
Y** number
0xFF means terminal bad，
0xFE means terminal idle
Default value is 77（Octonary）
I Attribute
Attribute of input terminal 0
High Speed Counting
2 ： 2 times frequency ； 4: 4 times
frequency(effective at AB phase counting mode)
Bit selection of HSC absolute
and relative（24 segment）
bit0 corresponds to HSC0， bit1corresponds to
HSC2，and so on, bit9 corresponds to HSC18
Interrupt circulating of 24
segments high speed counting
bit0 corresponds to HSC0， bit1corresponds to
HSC2，and so on, bit9 corresponds to HSC18
To Next Page
Loading...