Step 2 – Install REX Software on Your PC
To install the REX software:
1. If it’s not already there, insert the REX CD into your PC’s CD-ROM
drive.
2. Select
Run
from Windows' Start menu. When the Run dialog box
displays, type x:\setup
(substitute your CD-ROM drive's letter for the
x). Then click
OK
.
3. Select
Install your REX 6000
and follow the on-screen instructions.
A PIM is personal information management software that runs on
your PC and stores contacts, appointments, memos etc. During the
installation you will have three choices with respect to a PIM:
•
Intellisync PIM
–Choose this option if you do not have a PIM and
you want to install the Intellisync PIM provided with REX.
•
Microsoft Outlook
–Choose this option if you have Microsoft
Outlook (part of Microsoft Office) and you want to use it as your
PIM. REX does not support Microsoft Outlook Express.
•
None/Other
–Choose this option if you want to use REX without a
PIM or you have a PIM other than Microsoft Outlook. If you have
another PIM, visit
www.rex.net
.
Follow the remaining on-screen instructions. When the installation is
complete, you may optionally choose from the following selections:
•
View Documentation
– view the online user guide.
•
Visit www.rex.net for free services
– visit the REX Web site to
read about updates and other information pertaining to REX. You
can also sign up for Web services and register your product
online. You will need the product ID number (see page 4).
•
Register your REX 6000
– register your REX card. You will need
the product ID number (see page 4). This step is unnecessary if
you register at
www.rex.net
.
•
Exit
– exits the install program.
When you are done with these options, select
Exit
and remove the CD-
ROM from the drive.
To Next Page
Loading...