Need help?Do you have a question about the XLC Azura Extra LED and is the answer not in the manual?
Attach carrier to tow bar by tilting and pushing handle until it clicks.
Lower the handle to horizontal for automatic carrier fixation.
Secure towbar fixation by turning the key to lock.
Release clip holding wings to unfold them.
Insert wheel straps to secure bicycles along rails.
Fold frame clamps upwards to ease bicycle placement.
Position first bicycle with chain guard towards the car.
Lift rear wheel into rail, holding handlebars.
Tilt carrier downwards with two hands and feet on pedal.
Tilt carrier upwards with two hands until it locks.
Verify carrier stability by pulling it towards you.
Remove one bicycle at a time by loosening its straps and clamp.
Press blue knob and pull straps out to loosen.
Loosen frame clamp from saddle tube while holding bicycle.
Lift the bicycle off the carrier.
Slide wheel clamps inwards to facilitate carrier folding.
Hang frame clamps down and tighten locking knob.
Unlock and lift left-hand wing upwards.
Remove plug from car socket and place in holder.
Test carrier rotation to ensure proper clamping force.
Verify carrier horizontal alignment and stability by pushing wings.
Confirm central tube is vertical for straight carrier assembly.
General| Light Source | LED |
|---|---|
| Color Temperature | 6000K |
| Housing Material | Aluminum |
| Lens Material | Polycarbonate |
| IP Rating | IP67 |
To Next Page
