Need help?Do you have a question about the xmartO WNV18 and is the answer not in the manual?
General| Video Channels | 8 channels |
|---|---|
| Video Compression | H.264 |
| Recording Resolution | 1080p |
| Network Interface | RJ45 10/100Mbps |
| Power Supply | DC 12V |
| Video Output | HDMI, VGA |
| Operating System | Embedded Linux |
| Remote Access | Yes |
| Mobile Access | Yes |
| Storage Capacity | Supports up to 6TB HDD |
Details technical specifications for 4CH and 8CH NVR models, including inputs, outputs, and dimensions.
Lists the main functionalities and advantages of the NVR system, such as wireless connectivity and remote access.
Describes the indicators and buttons on the front of the NVR unit.
Details the ports and connectors available on the rear of the NVR.
Provides essential safety and placement guidelines before installing the NVR and cameras.
Guides on how to physically install and connect a SATA hard drive into the NVR.
Covers NVR placement, Wi-Fi range considerations, and initial system testing.
Details startup, login, logout, reboot, screen display, and shutdown procedures.
Methods for adding new cameras to the NVR system, including Match Code and Auto Add.
Sets up NVR network connection via WAN port for remote access.
Configures recording schedules based on specific times and days.
Enables recording only when motion is detected within the camera's view.
Transfer recorded video files from the NVR to a USB flash drive.
Manages hard drive information, formats the drive, and sets auto-erase options.
Instructions for upgrading the NVR's system firmware via USB.
Guides for accessing cameras using Internet Explorer (local and remote).
Instructions for using the Central Management System software for PC access.
Guide to downloading and using the mobile app for viewing cameras on a phone.
To Next Page
