Need help?Do you have a question about the XMLite LM285 and is the answer not in the manual?
Guidelines for operating the fixture at temperatures not exceeding 40°C to prevent damage.
Ensures secure mounting by verifying facility strength and using safety ropes for installation.
Avoid direct viewing of exposed bulbs and ensure lens covers are intact to prevent eye damage.
Emphasizes qualified electrical connections, proper grounding, and power cutoff during maintenance.
Instructions to avoid mounting on combustible materials and keep away from flammable substances.
The main structural component of the moving head wash fixture.
The movable arm connecting the head to the base, housing key mechanisms.
The optical component responsible for light projection and beam shaping.
Component used for carrying or positioning the lighting fixture.
The lower part of the fixture providing stability and housing electronic components.
Details on channels, lamp type, power, display, lens, zoom, dimmer, pan/tilt, IP rating, and weight.
Illustrates the beam angle and light distribution at different projection distances.
Configuration for DMX addressing, including min/max values and saving settings.
Controls for run mode, channel mode, pan/tilt reverse, opto check, and speed settings.
Calibration for Pan, Tilt, and Focus to establish zero points.
Settings for channel definition, limit, and configuration management.
Procedures for unlocking features using codes or passwords.
Control options for lamps, motors, and test runs.
Displays DMX values for various functions like Pan, Tilt, and Focus.
Provides motor reset state information for Pan and Tilt optics.
Details on fixture running hours.
Controls backlight brightness, auto-off timers, menu return, and light flash.
Adjustments for dimmer mode to control light intensity.
Detailed DMX values and descriptions for strobe effects in different modes.
DMX channels for controlling overall dimmer intensity from dark to bright.
DMX channels for adjusting the focus of the light beam.
DMX channels for controlling horizontal and vertical movement of the fixture.
DMX channels for controlling color mixing using RGBW and color temperature.
DMX channels for selecting and controlling gobo patterns.
DMX channels for activating and controlling various built-in lighting effects.
General| Brand | XMLite |
|---|---|
| Model | LM285 |
| Category | DJ Equipment |
| Language | English |
To Next Page