EasyManua.ls Logo

Xo ODONTOSURGE User Manual

Xo ODONTOSURGE
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
XO CARE A/S Usserød Mølle Håndværkersvinget 6 DK-2970 Hørsholm Denmark
tel +45 70 20 55 11 fax +45 70 20 55 10 www.xo-care.com
XO ODONTOSURGE
Instruction Manual
YA-551, vers. 1.00
Question and Answer IconNeed help?

Do you have a question about the Xo ODONTOSURGE and is the answer not in the manual?

Xo ODONTOSURGE Specifications

General IconGeneral
BrandXo
ModelODONTOSURGE
CategoryDental equipment
LanguageEnglish

Summary

Introduction to XO Odontosurge

Component Parts - Device Overview

Instrument Socket

The port where the instrument connects to the handpiece cord.

ON/OFF Finger Switch

Activates and deactivates the instrument during operation.

Handpiece and Cord

The detachable handpiece and its connecting cord.

Handpiece Holder

Component for safely storing the handpiece.

Mode Switch Panel

Controls for selecting operation modes (COAG/CUT).

Control Box

The main unit housing the electronic components.

Mains Power Cord

Connects the unit to the electrical power supply.

Component Parts - Indicators and Power Connections

Indicator Lamps

Green, blue (COAG), and yellow (CUT) lamps indicating unit status.

Handpiece Cord Connector

Connection point for the handpiece cord on the control box.

Warning Symbol

Indicates a warning symbol related to the handpiece cord connector.

Mains Power Inlet

Socket for the mains power cord on the control box.

Main ON/OFF Switch

Primary switch to turn the unit on and off.

Fuse Drawer

Compartment for the unit's fuse.

XO Odontosurge Features

High Frequency Operation

Details the 27 MHz operating frequency and its benefits.

Ergonomics and User Experience

Discusses ease of use, portability, and design aspects.

Unit Setup and Connection

Handpiece and Cord Connection

Instructions for connecting the handpiece to the cord and control box.

Handpiece Holder Attachment

Procedure for attaching the handpiece holder to the control box.

Control Box Power Connection

Guidance on checking voltage rating and connecting the power cord.

Operation Controls

Mode Switch Panel Functions

Explanation of the mode switch panel and indicator lamps.

ON/OFF Finger Switch Operation

Details on how to use the finger switch for instrument activation.

How to Operate the XO Odontosurge

Cutting (Dissection) Procedure

Step-by-step instructions for performing cutting operations.

Coagulation (Haemostasis) Procedure

Step-by-step instructions for performing coagulation.

Important Operational Safety Precautions

Pre-operation Study Requirement

Emphasizes the need to study preparation and familiarization before use.

Finger Switch Acoustic Signal Check

Ensuring the finger switch provides an acoustic signal before operation.

Standby Mode During Pauses/Completion

Instruction to switch to standby mode during pauses or after treatment.

Standby Mode Before Instrument Changes

Requirement to use standby mode before inserting or removing instruments.

Preparation and Familiarization

Dissection Exercise Guide

Practical exercise for learning cutting techniques with meat.

General Advice for Practice

Key tips and advice for practicing cutting and coagulation.

Coagulation Exercise

Clinical Applications of XO Odontosurge

Contraindications for HF Soft Tissue Handling

Lists conditions and situations where HF handling is not recommended.

Cleaning and Sterilization Procedures

Cleaning and Sterilization of Instruments

Guidelines for cleaning and autoclaving instruments.

Cleaning and Sterilization of Handpiece and Cord

Procedures for cleaning and autoclaving the handpiece and cord.

Cleaning of the Control Box

Instructions for cleaning the control box; not to be autoclaved.

Accessories and Specifications

Available Accessories

List of included and available accessories for the unit.

Maintenance and Safety Guidelines

Important instructions for maintaining the unit and ensuring safety.

Technical Specifications

Warranty Information

Important Notes and Warnings

Electromagnetic Interference Warning

Caution regarding electromagnetic interference with other devices.

Pacemaker Contraindication

Warning against using the unit on patients with cardiac pacemakers.

Flammable Gas Ignition Risk

Precautions against contact with flammable materials and anaesthetic agents.

General Operating Safety Warnings

Warnings about instrument handling, standby mode, and acoustic signals.

Incident Reporting and Handling

Related product manuals