installation check list
This manual must remain with the end customer.
This product is designed for outdoor, residential use only.
NEVER install this product in any enclosed space such as a garage, patio, or breezeway.
NEVER install this product into a setting constructed with combustible materials without an
XOG30JACKET insulated liner.
Observe all clearances regrding combustible and non-combustible structures and overheads
as set forth in this manual.
Ensure that the final installation is level, side to side and front to back.
Comply with all local building codes, in the absence of local codes, installation should conform
with the National Fuel Gas Code ANSI Z223.1/NFPA54, Natural Gas and Propane installation
Code, CSA B149.1 or Propane Storage and Handling Code, B149.2 in Canada.
All electrical connections must comply with local builing codes or in the absence of local codes
National Electrical Code. Appliance must be connected to a GFI protected three prong outlet.
Minimize the length of your gas run - XO recommends a minimum 3/4” ID gas supply line.
All joints and connections must be leak tested prior to first use.
All island / cabinet enclosures must include adequate cross ventilation.
NEVER install this appliance in an elevated location without the approval of local code authorities.
Ensure the area where the unit is installed is free of all combustible materials.
TEAM LIFT: This appliance is extremely heavy - two or more people are required to lift and
move it.
IMPORTANT: The burners are secured with cable ties to prevent movement in transit. The
Please dispose of all shipping materials in an environmentally responsible fashion.
THIS PAGE IS NOT A SUBSTITUTE FOR READING THE ENTIRE MANUAL
5
To Next Page
Loading...
General