To Next PageTo Next Page
Need help?Do you have a question about the Xo XOM30G and is the answer not in the manual?
General| Width | 30 inches |
|---|---|
| Number of speeds | 3 |
| Lighting | LED |
| Material | Stainless Steel |
| Type | Under Cabinet |
| Number of Fan Speeds | 3 |
| Filter Type | Aluminum Mesh |
| Control Type | Push Button |
| Venting Type | Ducted/Ductless |
| CFM | 400 CFM |
| Airflow Capacity | 300 CFM |
| Noise Level | 65 dB |
Details warranty coverage for parts and labor against manufacturing defects for two years.
Lists exclusions from warranty coverage such as improper installation and user training.
Covers safe operation, ducting, and material handling for the appliance.
Specific warnings to reduce risks of electrical hazards and personal injury during operation.
Guidelines to prevent and handle grease fires on the cooktop.
Detailed steps to prevent and manage grease fires, including extinguisher use protocols.
Warnings concerning electrical wiring and ventilation standards during installation.
Guidelines on duct material, grounding, and general appliance usage safety.
Chart detailing duct pieces, dimensions, and equivalent lengths for runs.
Specifies maximum length and rules for using flexible ducting.
Notes on how ventilation hoods affect other naturally vented systems.
Warnings about duct termination into spaces and material usage.
Instructions for routing, connecting, and sealing ductwork for optimal performance.
Provides frontal and side view dimensions of the hood unit.
Shows top view and details of the exhaust hole connection.
Specifies required mounting height above the cooking surface for optimal performance.
Instructions for drilling holes and securing the hood to the wall using appropriate hardware.
Emphasizes using wall studs or anchors capable of supporting 75 lbs for secure mounting.
Emphasizes the critical need for proper grounding for personal safety.
Details voltage, frequency, circuit, and wire requirements for connection.
Instructions on connecting the grounding conductor for safe operation.
Instructions on how to properly secure the electrical box before making electrical connections.
Explains wire connections (L, N, G) and conduit fitting requirements.
Instructions for connecting the duct to the hood, including height and filter removal.
Guides on arranging electrical supply and preparing the flue for installation.
Steps for connecting the flue, securing it, and fixing the duct cover.
Lists components included in the ductless recirculating filter kit.
Initial steps for installing the recirculating option components.
Instructions for assembling and fitting the air diverter to the chimney unit.
Steps to fasten the air diverter and connect flexible ducting.
Steps for placing and securing the flues for the recirculating unit.
Guidance on installing charcoal filters into the ducting unit.
Instructions for removing and reinstalling aluminum panels on the unit.
Explains the function of each control button (Light, Off, Speed, Timer).
Details how to activate and use the intensive speed function.
Explains the 'clean air' function and its exclusion.
Describes the function of the automatic stop timer for delayed shutdown.
Explains how LED indicators signal filter cleaning or replacement needs.
Tips on when to use the hood and the importance of regular maintenance.
Instructions for cleaning and replacing anti-grease filters, including dishwasher use.
Guidance on when and how to replace active carbon filters for air purification.
Methods for cleaning the hood's interior and exterior surfaces.
Advice on the hood light's intended use and bulb lifespan.
Recommends soap/detergent and proper drying techniques for stainless steel.
Methods for removing persistent discoloration or deposits on surfaces.
Lists substances and tools to avoid to prevent damage to surfaces.
Details the fuse type and who should replace it for lamp circuit protection.
Step-by-step guide for safely replacing the hood's light bulbs.
Details the XORFK01 kit for recirculating installations.
Describes the XOEDCM accessory for taller ceilings.
Lists hardware types, descriptions, and quantities provided for installation.
Visual reference to duct bracket, aluminum filter, and duct cover.
Highlights key features like blower capacity, controls, and filters.
Outlines duct requirements, ductless option, and electrical specifications.
Lists optional accessories like duct cover extension and recirculating kit.
