washing (interior) cont.
Proper maintenance, cleaning and santizing is essential to ensure your
ice is safe, fresh and odor free.
5. Clean the gap of the nozzle frame fixed
on the vessel sheet (water tank).
6. Lift the drain connection inside the vessel
sheet (water tank), clean it, and drain the water.
* The drain connection must be re-assembled
in the correct position after cleaning or it will
continue to drain and be unable to make ice.
CLEANING THE ICE TANK AND WATER TANK FILTERS
Empty the ice tank and prepare a cleaning solution by mixing
2 tablespoons of dishwashing detergent with 2 gallons of warm water
(95~115 F).
Soak a clean cloth in the solution
and clean the inside of the ice tank.
Pour an appropriate amount of the solution
into the drain pipe, and allow to air dry.
* Press the switch to set it to (WASH) when cleaning the product; this will
repeat the process of supplying water for about 2 minutes and operating
the circulation pump 3 times, enabling easier cleaning.
23
o
To Next Page
Loading...
Need help?
General
