Xorcom XP0120P - Page 5

How To Find IP Address and MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to “Status” and press the “Enter” softkey.
3. Scroll down to see either the IP address or the MAC address.
How To Set the Configuration Server
Quick Steps
1. Select the “Menu” button.
2. Scroll down to “Settings” and press the ”Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
4. Scroll down to “Auto Provision” and press the “Enter” softkey.
5. Define the URL to your PBX. Generally this would be tftp://IPADDRESS
such as tftp://10.10.0.1 in our example and press the “Save” button at the bottom.
How To Factory Default
Quick Steps
1. Select the “Menu” button.
2. Scroll down to “Settings” and press the “Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
Back Enter
Setting Type 2/2
1. Basic Settings
2. Advanced Settings
XP0120P
Back Enter
Advanced Settings 5/9
3. Softkey Label
4. Phone Settings
2. Reset to factory
XP0120P
4. Scroll down to “Reset to Factory” and press the “Enter” softkey.
© Copyright Schmooze Com, 2012