What to do if my Xoro HRK 7550 remote control is not responding?
If your Xoro DVR remote control isn't working, first, ensure the device is plugged in and turned on. Then, aim the remote directly at the front panel of the DVR, making sure nothing is blocking the signal. If it still doesn't respond, try replacing the batteries in the remote.
Why is the standby light not lit on my Xoro HRK 7550?
If the standby light on your Xoro DVR isn't lit, the issue might be with the power supply. First, check that the mains lead is properly plugged in. If it is, inspect the mains fuse to see if it has blown.
What to do if the remote control will not operate my Xoro DVR?
If the remote control is not operating your Xoro DVR, it could be due to a couple of reasons. First, replace the batteries in your remote control. Second, check that there is nothing obstructing the path between the remote control and the receiver.
What to do if my Xoro DVR says 'No signal found'?
If your Xoro DVR shows 'No signal found', the problem likely lies with your aerial connection. Start by checking the aerial lead to ensure it's properly connected. Next, inspect the aerial itself for any damage or misalignment. If everything seems fine, the issue might be that you are out of the digital signal area, check with dealer.
Why can't my Xoro HRK 7550 DVR receive digital reception after moving it to another room?
If you are no longer able to receive digital reception on your Xoro DVR after moving it to another room, the aerial feed at the new location might be the issue. Try a direct feed from the antenna, as the distribution system may reduce the digital signal received by the box.
How to reset forgotten channel lock code on Xoro DVR?
If you've forgotten the channel lock code for your Xoro DVR, re-installing the channels should cancel the channel lock.
What does 'Scrambled channel message' mean on Xoro HRK 7550 DVR?
If you're seeing a 'Scrambled channel' message on your Xoro DVR, it means the current channel is scrambled. To fix this, simply select an alternative channel.
Essential safety precautions for operating the set-top box and accessories.
Diagram and instructions for connecting the STB to a television set.
Diagram and instructions for connecting the STB to a Hi-Fi audio system.
Instructions for installing the STB and performing channel scans via DVBC, Quick Search, or Auto Search.
How to view, favorite, lock, skip, move, sort, delete, and rename TV channels.
How to view and listen to radio channels, noting differences from TV channel management.
Adjusting video resolution, aspect mode, and audio output settings for TV connection.
Customizing display parameters such as brightness, contrast, saturation, hue, and sharpness.
Configuring parental lock for menus and channels, and changing the password.
Restoring the STB to its original factory settings, including clearing channels.
Procedures for updating the STB software via OTA or USB.
Guide to identify and resolve common issues encountered with the STB.
Technical specifications for tuner, decoder, video/audio formats, and connection interfaces.
To Next Page
General