To Next Page
V
valeriegomezSep 4, 2025
What to do if my Xoro Receiver has no power?
- SSarah RodriguezSep 4, 2025
If your Xoro Receiver isn't turning on, ensure the power cord is securely plugged into the outlet and that the power is switched on.
What to do if my Xoro Receiver has no power?
If your Xoro Receiver isn't turning on, ensure the power cord is securely plugged into the outlet and that the power is switched on.
Why does my Xoro Receiver recording have jerkings or malfunctions?
If your recordings have jerkings or other malfunctions, it could be that the connected storage is too slow. Please control the reception quality of the dish and align them for getting better quality.
Why is audio or subtitle function not working on my Xoro Receiver?
If the audio or subtitle function isn't working, it could be that the other audio track is not supported or that subtitles are not supported by the broadcaster. Try changing the audio track by pressing the AUDIO button or the subtitle track by pressing the SUBTITLE button.
Why does my Xoro Receiver have no recording?
If the Xoro Receiver is not recording, make sure a USB memory is connected and that there is free space on the storage.
What to do if my Xoro Receiver can not scan programs?
If your receiver isn't scanning programs, adjust the dish and refer to the settings for searching.
Why am I getting no DVB-S reception or distorted pictures on my Xoro Receiver?
If you're experiencing no DVB-S reception or seeing distorted images, it might be due to the DVB-S reception in your region. Try realigning the dish, paying attention to the satellite direction. Consider using a bigger dish and retry the Auto Scan.
What to do if my Xoro Receiver remote control does not work?
If the remote control isn't working, first change the batteries. Also, make sure you are operating the remote within the normal range (max. 5 meters, 30°), and that the sensor is not exposed to bright light.
How to fix no picture or no colored pictures on my Xoro Receiver?
If you're not getting a picture or the colors are off, check the connection to the TV set. Also, verify the video output mode in the setup menu.
Why is my Xoro Receiver showing no sound?
If there is no sound, first, ensure that Mute is off by pressing the MUTE button. Then, increase the volume by pressing the VOL+ button. Finally, check the connection to your TV set or amplifier.
What to do if my Xoro TV DVD Combo has no power?
If your Xoro TV DVD Combo has no power, ensure the power cord is securely plugged into the outlet and the power is turned on.
Identifies and describes the components on the front panel of the XORO HRS8560.
Identifies and describes the connections and ports on the rear panel of the XORO HRS8560.
Instructions for inserting batteries and the optimal operating range for the remote control.
Explains the functions of various buttons on the remote control for the XORO HRS8560.
Guides on how to connect the XORO HRS8560 receiver to a television set.
Instructions for connecting the satellite dish to the LNB IN port of the HRS8560.
Guide on connecting USB storage devices for recording and media playback.
Overview of the initial setup menu and options for the XORO HRS8560.
Preparation steps required for successful channel scanning, including antenna setup.
Step-by-step guide for configuring satellite dish settings for channel scanning.
Detailed explanation of various parameters within the Dish Setup menu.
Instructions on how to perform a channel scan to find available TV and radio programs.
Setting up recordings directly from the EPG.
General| Category | TV DVD Combo |
|---|---|
| Resolution | 1366 x 768 pixels |
| Aspect ratio | 16:9 |
| DVD Player | Yes |
| HDMI ports | 1 |
| USB ports | 1 |
| Sound Output | 2 x 3W |
