Need help?Do you have a question about the Xoro HST 500S and is the answer not in the manual?
General| Video Resolution | 1080p |
|---|---|
| Tuner | DVB-S2 |
| Connectivity | HDMI, USB |
| Video formats | MPEG2, MPEG4, H.264 |
| Audio formats | MP3, AAC |
| Power Supply | 12V DC |
| Type | DVB-S2 Full HD Receiver |
General safety rules for operating the device safely and preventing hazards.
Instructions for proper usage, including screen saver and 4:3 mode.
Information on correct installation and alignment of satellite reception systems.
Procedures to follow in case of device malfunction or service needs.
Explanation of buttons in the top sections of the remote control.
Explanation of playback, volume, and navigation buttons.
Steps for connecting the device to a TV via HDMI or analog cables.
Instructions for connecting the IP-Box to a network via Ethernet.
How to connect the satellite dish to the device's LNB IN port.
Initial setup screens for language selection and welcome message.
Configuring picture size and position for optimal display on the TV.
Guide to connecting the device to a wireless network via Wi-Fi.
Final steps to finish the initial installation process.
Detailed steps for connecting to and managing Wi-Fi networks.
Overview of satellite television reception and setup.
Launching and operating the DVB application for satellite TV.
How to access and use the EPG for program information.
Setting up satellite reception and performing channel scans.
Selecting satellites and configuring their parameters for reception.
Configuring LNB type and power supply for satellite reception.
Configuring DiSEqC and selecting satellite search modes.
Performing channel scans and filtering results (Free/Paid).
Setting up a Unicable system for satellite reception.
Defining band frequencies for Unicable user bands.
Restoring the device to its original factory settings.
Details about the product's warranty coverage and limitations.
To Next Page
