Why is there no sound on my Xoro PTL 1015?
There could be several reasons for the lack of sound on your Xoro Portable TV. First, increase the volume using the VOL + button. Also, the built-in speakers might be off because headphones or an HDMI device are connected. Check if the built-in speakers are turned on. If you are using HDMI, refer to the HDMI audio settings. If you are using AV OUT, ensure you have a suitable cable.
What to do if not all channels are found on Xoro PTL 1015?
If your Xoro Portable TV isn't finding all channels, it could be due to a few reasons. First, make sure you have DVB-T/T2 TV reception in your area and align the antenna correctly. You may also need to repeat the channel scan. If that doesn't work, consider buying a more efficient antenna. If necessary, switch on the power supply for your antenna.
What to do if there is no image on a connected TV from Xoro Portable TV?
If you're not getting an image on a connected TV from your Xoro Portable TV, and you're using HDMI, check the HDMI resolution. If you're using AV OUT, make sure you have a suitable cable.
What to do if the LED on the vehicle power cable of Xoro PTL 1015 Portable TV does not light up?
If the LED on the vehicle power cable of your Xoro Portable TV doesn't light up, it could be due to the voltage at the input of the vehicle power cable being too high or too low, or the output of the vehicle power cable is overloaded or short-circuited. Disconnect the TV from the cable and check that the LED is lit. The tip of the vehicle power cable can be unscrewed for checking and changing the fuse. ATTENTION: The fuse may only be replaced by a fuse with identical values. The fuse only responds in case of extreme overload. When replacing a defective fuse, the vehicle electrical system, the television and the general function of the vehicle power cable must therefore also be checked. Consult a specialist.
General| Brand | Xoro |
|---|---|
| Model | PTL 1015 |
| Category | Portable TV |
| Language | English |
To Next Page