1
FOUR (4)
MOUNTING
BRACKETS
2
3
2X
4
ASSEMBLY INSTRUCTIONS
1. Use appropriate mounting
bracket to ensure screws are
anchored in wood. If not
possible, use drywall anchors.
2. With gate sitting on the floor, expand gate to fit opening and mark
and mark for mounting all four (4)
mounting brackets (A). Bottom
mounting brackets can slide up to
mount above baseboard if needed
(B), but mount as close to floor
as possible for maximum stability.
3. Drill holes (C) for plastic anchor (into
drywall) or pilot hole (for wood
mounting). Insert plastic anchors into
drywall, if applicable (D).
4. Install gate with 1” screws (E). Position gate into final
desired angles. Twist tight all joints (F)
counterclockwise to secure gate into final position.
GATE IS RECOMMENDED FOR CHILDREN BETWEEEN 6 AND 24 MONTHS.
XPANDAGATE
FOR OPENINGS 30” (78cm) - 90” (228cm)
Max span in 90”
A
B
8X
C
D
8X
8X
E
F
INCLUDED:
EIGHT (8)
DRYWALL
ANCHORS
EIGHT (8)
1” SCREWS
GATE OPERATION
TO OPEN
Slide button back
with thumb
and lift gate
to open.
TO CLOSE
Push gate shut.
Listen for “CLICK”
to ensure gate is
locked.
TIP FOR
ASSEMBLY,
DISASSEMBLY
AND ADDING
EXTENSIONS
1. Depress button
lock with screwdriver.
2. Pull mounting
bracket off gate.
OR
You will hear a “click”
when it is seated.
CHILDREN HAVE DIED OR BEEN SERIOUSLY INJURED WHEN ENCLOSURES ARE NOT SECURELY INSTALLED. ALWAYS INSTALL AND USE ENCLOSURES AS
DIRECTED USING ALL REQUIRED PARTS. STOP USING WHEN A CHILD CAN CLIMB OVER OR DISLODGE THE ENCLOSURE. USE ONLY WITH THE LATCHING
MECHANSISM SECURELY ENGAGED. TO PREVENT FALLS, NEVER USE AT THE TOP OF THE STAIRS. NEVER USE TO KEEP CHILD AWAY FROM POOL.
To Next Page
Need help?
General