Need help?Do you have a question about the Xpelair VX100T and is the answer not in the manual?
Essential pre-installation checks including electrical ratings, professional consultation, and power isolation.
Details included components, required tools, and operational specifics for different fan models.
Install high, away from air sources, avoid high temperatures and cooker hobs.
Requires a prepared hole and an appropriate external wall grille and sleeve duct.
Requires a prepared hole and specific ceiling mounting items, including flexible ducting and traps.
Undo electrical cover screw, remove cover, and ensure fan body is horizontal.
Ensure fan body is horizontally orientated if wall mounting.
Ensure mains isolation, follow diagrams, and secure cables properly.
Adjust over-run timer; fan operates for a set delay when the switch is turned off.
Operate the fan using a standard on/off switch.
Ensure the fan is completely isolated from the mains supply before cleaning.
Use a damp cloth or warm soapy water; avoid immersion and harsh chemicals.
Contact details for Xpelair's comprehensive range of technical services in the UK.
Contact details for Xpelair's technical support and services in Ireland.
Contact your local Xpelair distributor for international technical advice and service.
Essential pre-installation checks including electrical ratings, professional consultation, and power isolation.
Details included components, required tools, and operational specifics for different fan models.
Install high, away from air sources, avoid high temperatures and cooker hobs.
Requires a prepared hole and an appropriate external wall grille and sleeve duct.
Requires a prepared hole and specific ceiling mounting items, including flexible ducting and traps.
Undo electrical cover screw, remove cover, and ensure fan body is horizontal.
Ensure fan body is horizontally orientated if wall mounting.
Ensure mains isolation, follow diagrams, and secure cables properly.
Adjust over-run timer; fan operates for a set delay when the switch is turned off.
Operate the fan using a standard on/off switch.
Ensure the fan is completely isolated from the mains supply before cleaning.
Use a damp cloth or warm soapy water; avoid immersion and harsh chemicals.
Contact details for Xpelair's comprehensive range of technical services in the UK.
Contact details for Xpelair's technical support and services in Ireland.
Contact your local Xpelair distributor for international technical advice and service.
General| Timer | Yes |
|---|---|
| Voltage | 220-240V |
| IP Rating | IPX4 |
| Diameter | 100mm |
| Type | Axial |
| Installation | Wall or Ceiling |
| Airflow | 100 m³/h |
To Next Page
