English - 7
Breathing Hole
WARNING
• Do not tape or block the breathing holes on
the tapered flow nozzle and the air pump
adapters.
• The breathing holes allow the machine to
release the air pressure when the straw
adapter or the detail brush is blocked.
• Blocking the breathing holes could cause
serious failure on the machine and void the
warranty.
Installation and Operation Guide
Nozzle Installation (Continued)
Power Supply
(Continued)
Air Pump Adapters
• The air pump adapter set consists
of three adapters. Each adapter is
designed for different kind of inflatable
valves.
• Simply attach the desired adapter to
the air inlet of the electric duster.
Amperage Rating
• This appliance consumes high amperage electricity of 4.5 A (See Page 13: Technical
Specifications).
• Make sure you have a power socket with a compatible amperage rating and fuse
setting. You should also check if the power circuit of your building can support the total
power consumption of all the devices including this appliance.
!
To Next Page
Loading...
Need help?
General
