XPower B-8 - Dryer Operation; Xpower B-8 Technical Specifications

1. Place the dryer on a flat surface. Plug the electrical cord into a 3-prong outlet.
2. Connect the hose to the front hose connector and aach the desired nozzle.
3. Turn variable speed switch to desired speed.
4. To use heang element, choose desired heat seng or leave on off seng.
5. To reduce the risk of injury, close supervision is necessary when the unit is used near children.
Do not allow children to play with or around the unit.
- 2 -
OPERATION
SPECIFICATIONS
Model B-8 Unit Weight 12.3lbs
Volts/Cycle 115V/60Hz Unit Dimensions 17.2"x6.3"x9.8"
Power 4 HP Cord Length 10'
Motor
BRUSHLESS DC Filter System 
Max AMP 12A Styling Nozzles 3
Rated Airflow 150CFM Housing ABS
Speeds
Variable
Thermal Protecon

Heang Element
Variable