SDSK (Support Rod for Vertical Advertisement Blower)
A Support Rod (SDSK) is included with unit to stabilize the vertical advertising inflatable. The support
rod use is optional. However, it is strongly recommended to use the SDSK for large and tall advertising
inflatable. The support rod improves vertical stability and prevents complete inflatable collapse.
Accessories
Connect 3 pieces of 1.6’ short
rods one by one with bushings
to complete assembly of SDSK
rod. Insert rod bottom (non-cap)
into provided hole on the upper
cover and position sleeve over
rod before securing the
advertising sleeve.
cap
Assembling:
bushing
short rod
To Next Page
Loading...
Need help?
General
