1. To keep the unit clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Advertising Inflatable Blower with water.
3. When not in use, unplug and store the Advertising Inflatable Blower in a dry indoor place.
4. Always disconnect the Advertising Inflatable Blower from its power source before performing
any maintenance or cleaning.
Problem Possible Cause Soluon
a) Switch is OFF Turn switch ON
b) Faulty switch/cord Replace switch or cord
a) Check for obstrucon entering
through the intake or exhaust
Remove obstrucon
b) Check for any pressure against
blower housing
Remove any pressure
Weak Air Flow a) Obstructed vents/inlets Clean out vents/inlets
Motor Not Running
Scraping Noise From
Inflatable Blower
To Next Page
Loading...
Need help?
General
