XPower P-200AT - User Manual

Questions and Answers

S
Shawna BrownAug 12, 2025
What to do if my XPower Dehumidifier does not start?
- A
  allison95Aug 12, 2025
  If your XPower Dehumidifier doesn't start, first, ensure it's receiving power by checking the power supply. Next, make sure the power cord is correctly plugged in by removing and reconnecting it. If the unit has been working under extreme temperature, turn it off, unplug it, and allow it to cool down to a normal temperature. Also, if you're using the additional electrical receptacle (daisy chain), check if its circuit breaker has tripped; if so, remove all appliances from the receptacle and press the reset button. Lastly, ensure the timer switch is set to the “ON” position and not “0”.
A
Ann BrooksAug 19, 2025
Why does my XPower Dehumidifier unit run but the speed is abnormal?
- B
  Betty DavisSep 12, 2025
  If your XPower Dehumidifier runs at an abnormal speed, the air inlet or outlet might be blocked. Clear any obstructions to restore normal operation.
A
Andrea PerezAug 27, 2025
What to do if my XPower Engine air mover does not start?
- J
  Jeremy EvansAug 27, 2025
  If the XPower Engine air mover doesn't start, first, ensure it's receiving power by checking the power supply. Next, verify the power cord is securely plugged in; if not, remove and reconnect it. If the unit has been operating in extreme temperatures, turn it off, unplug it, and allow it to cool down. Also, if you're using the additional electrical receptacle (daisy chain), check if its circuit breaker has tripped; if so, remove all appliances from it and press the 'Reset' button. Finally, make sure the timer switch is set to the 'ON' position and not '0'.
Y
yhinesSep 3, 2025
Why is the speed abnormal on my XPower Engine?
- A
  Andrew PriceSep 3, 2025
  If the XPower Engine unit runs but the speed is abnormal, the air inlet or outlet might be blocked. Remove any blockage to restore normal operation.