EasyManuals Logo

XPower P-200T User Manual

XPower P-200T
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the
unit with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow at face or body.
3. To reduce the risk of fire or electric shock, do not use the Mini Air Mover with any solid-state speed
control device.
4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and /
or installation of a GFCI receptacle if necessary.
5. Do not operate the Mini Air Mover with a damaged cord or plug. Discard the unit or return it to an
authorized service facility for examination and/or repair.
6. Unplug the Mini Air Mover from the power supply before servicing or cleaning.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners,
or similar coverings. Place the power cord away from traffic area to prevent tripping.
8. Do not allow children to play with or around the Mini Air Mover at any time.
9. Do not move or carry the Mini Air Mover while unit is operating.
10. Mini Air Movers in operation must be supervised at all times.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the XPower P-200T and is the answer not in the manual?

XPower P-200T Specifications

General IconGeneral
BrandXPower
ModelP-200T
CategoryBlower
LanguageEnglish

Related product manuals