XPower P-80 Series User Manual

English - 7
Troubleshooting Guide
* The timer switch function does not apply to all models mentioned in this manual.
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
PROBLEM POSSIBLE CAUSE SOLUTION
Air mover does not
start
No electricity. Check for power supply.
The power cord is not properly
plugged in.
Remove and reconnect the
power cord.
The machine is working under
an extreme temperature.
Turn off the machine and
unplug it. Let the machine
cool down to normal
temperature.
The circuit breaker on the
additional electrical receptacle
(Daisy chain) jumps.
Remove all appliance on
the additional electrical
receptacle and press “Reset”.
The timer switch is set to “0”
position.*
Set the timer switch to “ON”
position.*
Unit runs but the
speed is abnormal
Air inlet or air outlet is blocked. Remove blockage.

XPower P-80 Series Specifications

General

Brand	XPower
Model	P-80 Series
Category	Dehumidifier
Language	English