XPower X-3000 Series User Manual

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Air Scrubber Owner's Manual

Model:

X-2000 Series / X-3000 Series

(115V 60HZ)

Read and save these instructions before use

www.xpower.com | 1-(855)-855-8868 | info@xpower.com

Index: NA-1-A7

Edition: 1.3.Final

Table of Contents

Questions and Answers:

C
Christina MorrisonJul 27, 2025
What to do if the additional electrical receptacle has no power on my XPower X-3000?
- S
  Sydney ClarkJul 27, 2025
  If your XPower Air Cleaner's additional electrical receptacle isn't providing power, it could be due to a tripped circuit breaker. To resolve this, remove all devices plugged into the receptacle and then press the circuit reset button. Alternatively, a ground fault may have interrupted power via a GFCI. In this case, switch off and unplug the Air Scrubber, remove all appliances from the additional receptacle, and press the GFCI reset button.
E
Erica BeckerAug 11, 2025
Why is there no air movement from my XPower X-3000?
- V
  Victoria SanchezAug 12, 2025
  If your XPower Air Cleaner is running but producing little to no air movement, the air outlet might be blocked. Check for and remove any obstructions. Another possible cause is that the filters are clogged, which is indicated by the filter change light. In this case, you should clean or replace the filters.

XPower X-3000 Series Specifications

General

Model	X-3000 Series
Type	Air Cleaner
Weight	7.7 lbs
Filter Replacement Indicator	Yes
Pre-Filter	Yes
Power Cord	6 ft
Filtration Technology	HEPA, Activated Carbon
Airflow	130 CFM
Motor	DC Motor
Speeds	3
Filtration	H13 HEPA Filter

Summary

Safety Instructions

Installation and Operation Guide

Selecting a Location

Optimal efficiency and filter lifespan depend on location choice: enclosed area, air circulation, and humidity levels.

Control Panel

Variable Speed Control

Controls fan speed for Model X-3400A. Turn clockwise for desired speed, MAX is highest, LOW is lowest.

Five Speed Control

Controls fan speed for specific models with 5 distinct speeds. '5' is highest, '1' is lowest.

User Maintenance Instructions

Machine Maintenance

Regular maintenance involves cleaning the housing, checking grilles, and proper storage.

Filter Maintenance

Clean the filters

Guidance on cleaning different filter types: Nylon Mesh, Pleated Media, Carbon, and HEPA filters.

Reload the filters

Instructions on correctly reloading filters into the air scrubber for optimal efficiency and lifespan.

Troubleshooting Guide

Related product manuals

Preview: XPower X-2000 Series

XPower X-2000 Series