DIRTCARPET
37
903308
SFH M3x8
902310
SH M3x10
902316
SH M3x16
7. FINAL ASSEMBLY
ORIENTATION FOR
STANDARD BATTERY PACK
NOTE ORIENTATION
for STANDARD BATTERY PACK
ORIENTATION FOR
LOW BATTERY PACK
NOTE ORIENTATION
for LOW BATTERY PACK
To ensure correct functioning of the
battery holder, DO NOT overtighten the
screw; the holder must be able to move.
To ensure correct functioning of the
battery holder, DO NOT overtighten the
screw; the holder must be able to move.
902308
SH M3x8
902325
SH M3x25
Battery
(NOT INCLUDED)
TIGHTEN GENTLY
DO NOT overtighten the screw to avoid
side guard damage.
For INITIAL SETTING use the battery position
setting maximum in rearward position.
HEIGHT ADJUSTMENT
1 turn = 0.5mm
BATTERY POSITION SETTING
960032
NUT M3
DO NOT overtighten the screw
to avoid side guard damage.
#326181
STAINLESS STEEL BATTERY WEIGHT 35g
2x
1x
2x
2x
2x
2x
3x10mm
3x8mm
3x16mm
UPPER BRACE
The screw must be used even though the brace is NOT mounted. Make sure
to NOT overtighten the screw. The screw cannot stick out past the gearbox.
IMPORTANT
ADJUSTMENT WITHOUT UPPER BRACE
INCORRECT
CORRECT
TIGHTEN GENTLY
3x8mm
3x25mm
To Next Page
Loading...