Need help?Do you have a question about the XS Vio OXY 70 and is the answer not in the manual?
General| Brand | XS |
|---|---|
| Model | Vio OXY 70 |
| Category | Analytical Instruments |
| Language | English |
Explains various warning terms (ATTENTION, WARNING, NOTE) and their associated symbols.
Outlines essential conditions for safe operation and operator safety.
Describes the function of each button on the instrument's keyboard.
Explains the meaning of the two-colour LED status indicator and its functions.
Explains how to connect the instrument to a power source, including safety precautions.
Explains the function of each button press (short, long) on the instrument.
Explains how to enter SETUP mode and select parameters for editing.
Guides the user through accessing the %O2 setup menu.
Details the setup menu structure for the O2 parameter.
Explains the procedure for calibrating the instrument with a zero oxygen standard.
Describes how to set the salinity value for accurate dissolved oxygen measurements.
Outlines the necessity and process for regularly calibrating the oxygen sensor.
Details the procedure for performing a 100% air calibration for the oxygen sensor.
Explains when and how to perform a 0% oxygen calibration.
Provides essential rules and checks before beginning a dissolved oxygen measurement.
Details the steps for conducting a dissolved oxygen measurement.
Guides the user through setting up the data logger parameters.
Details how to start, use, and stop the automatic data logger function.
To Next Page