XSONIC AIRSTEP Spk Edition User Manual

AIRSTEP Spk Edition User Manual
Index
• Quick Start
• 1. Current Channel Indicating
• 2. Toggle Effects Indicating
• 3. Charging
• 4. Upgrade Firmware Mode
• 5. USE The JIMI HENDRIX PACK Including TOGGLE THE J.H. Legendary
Wah
• 6. USE AIRSTEP Spk Edition and the Spark App At The Same Time(iOS Only)
• Firmware update
• Looper Mode
• 1. For Loopy HD(iOS)
• 2. For Mobius Looper(Computer)
• FAQ
Quick Start
Step 1. Turn on the power switch of the Spark 40 amp.
When AIRSTEP Spk Edition controlling Spark amp, you can still use all the functions in
Spark App except preset editing. Connect to the Spark 40 Audio in the system Bluetooth
setting to use with Spark App’s function or Bluetooth audio function.
If you don’t need to edit preset before using AIRSTEP Spk Edition, click skip in the Spark
App’s Startpage and go to Step 2
If you need to edit presets before using Spark amp with AIRSTEP Spk Edition, please make
sure AIRSTEP Spk edition is power off, then click connect in the Spark App’s Startpage.
After editing, please make sure that the hardware connection with the Spark App has been
ejected or forgotten as in the picture shown below, then go to Step 2.
How to eject/forget your Spark from the iOS app;
1. Click the profile in the Spark app, enter hardware settings.(P1)
2. Click”Eject”(P2)
How to eject/forget your Spark from the Android app;
1. Click” “(P3)
2. Click”Forget this devices”(P4)
3. Do not forget the Spark 40 Audio, click”Close”(P5)

XSONIC AIRSTEP Spk Edition Specifications

General

Power	Built-in Rechargeable Battery
Footswitches	5
Charging	USB Charging
Connectivity	Bluetooth
Compatibility	iOS, Android
Function	Control effects, and more
Mobile App Support	Yes
Type	Wireless Multi-Foot Controller

Summary

Quick Start Guide

Current Channel Indication

Explains how the footswitch LED indicates the current channel via blinking green color.

Toggle Effects Indication

Explains how the footswitch LED indicates the on/off status of Drive/Mod/Delay/Reverb.

Charging the AIRSTEP

Details how to charge the AIRSTEP using the USB charging cable or a 9v standard pedal power.

Firmware Upgrade Mode

Instructions on how to enter the firmware upgrade mode for the AIRSTEP.

Jimi Hendrix Pack Usage

Guide on using the Jimi Hendrix Pack and toggling the J.H. Legendary Wah.

Simultaneous App and Amp Control

Instructions for using AIRSTEP Spk Edition and the Spark App at the same time (iOS only).

Firmware Update Process

Using the AIRSTEP Updater

Steps and instructions for downloading and using the AIRSTEP Updater application.

Looper Mode Setup

Loopy HD (iOS) Configuration

Setup and configuration guide for using Loopy HD with AIRSTEP on iOS devices.

Mobius Looper (Computer) Configuration

Setup and configuration guide for using Mobius Looper with AIRSTEP on computers.

Frequently Asked Questions

Troubleshooting Empty Device List

Solutions for when the device list in the AIRSTEP application appears empty.

Resolving Channel Switching Lag

Addresses noticeable lag in switching channels and suggests a factory reset solution.