XSONIC AIRSTEP YT User Manual

AIRSTEP YT Edition User Manual
This is the official manual of how to use your AIRSTEP YT Edition.
1. Make sure your THR-II Amp is in the latest firmware. Before connecting AIRSTEP YT Edition and THR-II, please make sure that the
connection between THR-II and THR Remote App has been disconnected.
2. Turn on the power switch of the AIRSTEP YT Edition, the connection indicator will blink blue. AIRSTEP YT Edition will automatically
search and connect the THR-II nearby. If the connection with THR-II establishes, the connection indicator will be solid blue.
3. Here’s the mode list:(the factory default mode is Mode 1), AIRSTEP YT Edition has 3 control modes in total.
Select Mode 1/Mode 2/Mode 3 via holding the A/B/C footswitch and turn on the power switch.
For THR10II/THR10IIW/THR30IIW
A
B
C
D
E
Mode 1
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Mode 2
Compressor
Effect
Echo
Slot -
Slot +
Mode 3
Compressor
Effect
Echo
Reverb
Slot +
For THR30IIA

XSONIC AIRSTEP YT Specifications

General

Compatibility	iOS, Android, macOS, Windows
Battery Type	Lithium-Ion
Model	Airstep YT
Connectivity	Bluetooth, USB
Footswitches	5
Power	Built-in rechargeable battery
Charging Port	USB-C
Operating Range	Up to 10 meters

Summary

AIRSTEP YT Edition Setup and Modes

Initial Connection and Mode Selection

Guide to connecting the AIRSTEP YT Edition to THR-II amps and selecting operational modes.

THR10II/THR10IIW/THR30IIW Mode Slots

Table detailing slot assignments for modes 1, 2, and 3 on THR10II/THR10IIW/THR30IIW amplifiers.

THR-II App Limitations

App Connectivity and Preset Editing

Explains restrictions when AIRSTEP YT Edition is connected and how to edit presets.

AIRSTEP YT Edition Operational Indicators

Current Channel and Effect Status

Describes how footswitch LEDs indicate current slot and effect on/off status.

Charging and Firmware Upgrade

Instructions on charging the device and entering firmware upgrade mode.