Need help?Do you have a question about the XSPC RayStorm and is the answer not in the manual?
General| Brand | XSPC |
|---|---|
| Model | RayStorm |
| Category | Computer Hardware |
| Language | English |
Lists all parts included in the XSPC RayStorm kit.
Provides technical specifications for the CPU block, pumps, radiator, tubing, and fans.
Introduces the kit, emphasizes reading the guide, and suggests leak testing.
Outlines the three main installation phases and their corresponding page ranges.
Covers preparation for Intel LGA 2011, 1366, 1156, 1155, 775 sockets.
Instructions for preparing AMD AM2+, AM3, AM3+ sockets.
Details on preparing the radiator ports, pump, and waterblock, including LED installation.
Guides on planning tubing routes, avoiding kinks, and identifying component inlet/outlet ports.
Discusses internal mounting options and external rear/top mounting benefits.
Proper tubing cutting and attachment to barbed fittings with hose clips.
Steps for attaching tubing to compression fittings and ensuring a secure seal.
Covers attaching brackets to the radiator and the PC case for mounting.
Positioning components and connecting tubing, emphasizing slack and avoiding kinks.
Procedures for filling the loop with coolant and powering the PSU for leak testing.
Detailed instructions for the 24-hour leak test and air bleeding process.
Mounting the pump and fitting the waterblock onto Intel sockets (excluding LGA 2011).
Specific instructions for installing the waterblock on Intel LGA 2011 sockets.
Detailed instructions for fitting the waterblock onto AMD sockets.
Connecting fans/LEDs, setting pump speed, and initial monitoring.
Guidelines for long-term maintenance, including cleaning and coolant changes.
Explains how to handle small bubbles and normal water level drops.
Addresses high CPU temps, pump noise, and slow flow rate problems.
Discusses common leak points and advice on preventing them.
Information on coolant types and care for components.
To Next Page
