XSY AT1 User Manual

Inverter
AT1--Single-phase to three-phase
AT2--Single-phase to single-phase
AT3--Three-phase to three-phase
AT Simple general series
High performance and low noise/
Mini AC motor driver

XSY AT1 Specifications

General

Output Power	1000W
Input Voltage	24V
Output Voltage	220V
Frequency	50Hz
Protection Features	Overload

Summary

Chapter 1 Introduction

Service Environments

Defines the required environmental conditions for proper inverter operation.

Matters Needing Attention

Lists crucial points for safe and effective inverter installation and use.

Chapter 2 Installation and Wiring

Main Circuit Terminal and Function Description

Details main circuit terminals for AT1, AT2, and AT3 models.

Terminal Description

Provides a detailed list of terminal functions and their descriptions.

Multi-Speed Frequency Control

Table outlining frequency control settings for multi-speed input.

Basic Operation Wiring Diagrams

Wiring diagrams for AT1, AT2, and AT3 models showing connections.

Operation Panel Overview

Description of the inverter's front panel, displays, and indicators.

Key Functions and Instructions

Explanation of the functions of each key on the control panel.

Chapter 3 Parameter Specification

Parameter Specification Table

Comprehensive list of inverter parameters, their ranges, defaults, and units.

Password and Down Time Stop

Details on parameter setting password and countdown stop function.

Model-Specific Parameter Support

Information on parameters supported by specific inverter models (AT1, AT2, AT3).

Chapter 4 Fault Code

Parameter Setting Procedure

Step-by-step guide for setting and modifying inverter parameters.

Fault Code Descriptions

List of fault codes displayed by the inverter and their corresponding descriptions.

Chapter 5 Quality Commitment

Quality Commitment Regulations

Details the warranty scope, start period, and conditions for maintenance.