Xtant X2.1204 User Manual

Parameters
X2.1204
Los parámetros, Paramètres, Parameter
F
s
: 30.58 Hz
Q
ms
:
7.70
C
ms
: 0.085 mm/N
M
ms
: 320.70 g
R
ms
:
7.98 kg/s
V
as
:
1.362 ft³ (38.55 liters)
Encl. Displ.:
0.12 ft³ (3.40 liters)
X
max
:
0.670 in (17.02 mm)
D:
10.571 in (268.50 mm)
S
d
:
88.20 in² (569.00 cm²)
V
d
:
58.77 in³ (0.96 liters)
Q
es
:
1.19
R
e
: 3.72 Ω
B
l
:
13.85 Tm
P
rms
:
600 Watts
Q
ts
:
1.000
η
ο
: 0.089 %
SPLo: 81.68 dB
SPL
2.83V/1m
:
85.00 dB
Specifications
Las especificaciones , Spécifications, Spezifikationen
Recommended Power Rating of 300 - 600 Watts RMS
La Potencia nominal recomendada, Le Pouvoir recommandé Evaluant, Empfohlene Kraft Einzuschätze
21A8024

Xtant X2.1204 Specifications

General

Brand	Xtant
Model	X2.1204
Category	Subwoofer
Language	English

Summary

Speaker Parameters

Fs (Resonant Frequency)

Fs: 30.58 Hz, the fundamental resonant frequency of the speaker in free air.

Qms (Mechanical Q Factor)

Qms: 7.70, mechanical quality factor indicating damping due to mechanical losses.

Vas (Equivalent Volume)

Vas: 1.362 ft³ (38.55 liters), the volume of air having the same compliance as the speaker's suspension.

Xmax (Maximum Excursion)

Xmax: 0.670 in (17.02 mm), the maximum linear excursion of the voice coil.

Prms (Power Rating)

Prms: 600 Watts, the continuous power handling capability of the speaker.

SPL (Sound Pressure Level)

SPL 2.83V/1m: 85.00 dB, sensitivity measured at 1 meter with 2.83V input.

Enclosure Design

Sealed Enclosure Recommendation

XTANT recommends a sealed enclosure for best sound quality where space is premium.

Sealed Enclosure Dimensions

Diagrams and dimensions for building a sealed enclosure using 3/4" MDF.

Sealed Enclosure Parts List

List of parts required for constructing the recommended sealed enclosure.

Vented Enclosure Design

Vented Enclosure Recommendation

XTANT recommends a vented enclosure for excellent sound quality with increased output.

Vented Enclosure Dimensions

Diagrams and dimensions for building a vented enclosure using 3/4" MDF.

Vented Enclosure Parts List

List of parts required for constructing the recommended vented enclosure.

Wiring Configurations

Wired Direct Configuration

A 4 Ohm speaker will represent a 4 Ohm load when wired directly to the amplifier.

Two Speakers in Parallel

Wiring two 4 Ohm speakers in parallel results in a 2 Ohm load.

Four Speakers in Parallel

Wiring four 4 Ohm speakers in parallel results in a 10 Ohm load.

Three Speakers in Parallel

Wiring three 4 Ohm speakers in parallel results in a 1.30 Ohm load.