Xterra ERG220 ROWER - ERG220 Assembly Instructions: Seat Assembly

6
ERG220 Rower
ERG220 Assembly Instructions
34
62
38
2
#34 Limit pad 1pc
#62 M6*10 2pcs
#99 1pc
59
15
11
#59 ST4.0*16 2pcs
#11 1pc
#15 1pc
STEP-1
Seat Assembly
1
1. Slide the Seat Assembly (38) onto the Seat Rail (2). Make sure that the seat
faces the hinge.
2. Use 2 M6 x 10 Button Head Screws (62) to secure the Limit Pad (34) to the
Slide Rail (2).
3. Secure the Stop Brackets (11, 15) to the Seat Rail (2) using 2 ST4.0 x 16
Screws (59) to prevent the seat from sliding off the rail.