EasyManua.ls Logo

Xterra RSX1500 - Important Electrical Instructions; Important Operation Instructions

Xterra RSX1500
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RSX1500 Seated Stepper
3
WARNING!
NEVER remove any cover without rst disconnecting AC power
supply.
If A.C. voltage varies by ten percent (10%) or more, the performance
of your Seated Stepper may be affected. Such conditions are not
covered under your warranty. If you suspect the voltage is low,
contact your local power company or a licensed electrician for
proper testing.
NEVER expose this Seated Stepper to rain or moisture. This product
is NOT designed for use outdoors, near a pool or spa, or in any
other high humidity environment. Maximum environmental ratings
are 40-120 degrees Fahrenheit, 95% humidity non-condensing (no
water droplets forming on surfaces).
NEVER operate this Seated Stepper without reading and completely understanding the
results of any operational change you request from the computer.
Understand that changes in resistance do not occur immediately. Set your desired level on
the computer console and release the adjustment key. The computer will obey the
command gradually.
NEVER use your Seated Stepper during an electrical storm. Surges may occur in your
household power supply that could damage Seated Stepper components.
Use caution while participating in other activities while using your Seated Stepper such
as watching television, reading, etc. These distractions may cause you to lose balance,
resulting in serious injury.
Important Electrical Instructions
Important Operation Instructions
The Seated Stepper is equipped with transport wheels, which are engaged when the rear of
the Seated Stepper is lifted.
Transportation
Plug-In