XTM Racing X-Factor Nitro Monster Truck User Manual

1
Need help or have any questions? Call us at 1-714-963-0329 or send us an Email at service@globalhobby.net
Thank you for purchasing the XTM Racing X-Factor Nitro Monster Truck. These Operating Instructions are provided to help you enjoy your new
X-Factor Nitro Monster Truck without any of the hassles you might expect. Please read through all of the literature that is provided in the box. Doing
so will help you become familiar with how your X-Factor, 24.7 engine and radio system operate.
IMPORTANT Before operating your new X-Factor Nitro Monster Truck, please read and understand the warnings listed on the next page. Failure
to do so could lead to bodily harm and/or injury. The XTM Racing X-Factor Nitro Monster Truck is not intended for persons under 12 years of age,
unless closely supervised by an adult.
OPERATING
INSTRUCTIONS
Main Features of Your New XTM Racing X-Factor Nitro Monster Truck:
●
Prebuilt & Ready-to-Run
●
Powerful XTM Racing 24.7 Engine w/Header & Exhaust Pipe
●
Hitec Lynx Sport Radio w/High Torque Steering Servo
●
Factory-Painted Body
●
Multi-Link Cantilever Suspension
●
Telescoping Universals
●
Adjustable 2-Speed Forward/Reverse Transmission
●
XTM Racing R-Box Electronic Reverser
●
Full Set of Sealed Ball Bearings
●
Slipper Clutch w/Steel Main Gear
●
Large-Volume 1/8 Scale Shocks with Silicon Boots
The XTM Racing X-Factor Nitro Monster Truck is
distributed exclusively by Global Hobby Distributors,
18480 Bandilier Circle, Fountain Valley, CA 92708
All contents copyright © 2002, Global Hobby
Distributors Version V1.0 October 2002
Kit Product Number 145641

XTM Racing X-Factor Nitro Monster Truck Specifications

General

Scale	1/10
Fuel Type	Nitro
Drive	4WD
Power Source	Nitro Engine
Chassis	Aluminum
Body Type	Monster Truck
Drive Type	Shaft Drive

Summary

Main Features of Your XTM Racing X-Factor Nitro Monster Truck

Operating Instructions Overview

Safety Warnings and Precautions

Engine and Fuel Safety Warnings

Warnings related to engine operation and fuel handling hazards.

General Operating Safety Guidelines

Broader safety advice for model operation and general conduct.

Customer Information and Support

Section 1: Recommendations

Fuel Selection and Accessories

Guidance on choosing fuel and essential accessories for the truck.

Section 2: Other Recommended Items

Section 3: Becoming Familiar with Your Truck

Radio System Controls and Components

Explains the function of the transmitter's controls and its components.

Vehicle Component Identification

Key Parts and Their Functions

Describes the purpose and location of major vehicle parts.

Section 4: Preparing to Run Your Truck

Step 1: Final Assembly

Guides through the final assembly steps before the first run.

Radio System Checks and Controls

Step 2: Range Checking the Radio System

Procedure to verify radio system range and reliability.

Step 3: Double-Check Steering and Throttle

Verifies correct operation of steering and throttle/brake controls.

R-Box Electronic Reverser Setup

Step 4: Using the R-Box

Explains how to operate and configure the forward/reverse transmission system.

Section 5: Nitro Engine Familiarization

Carburetor Components Explained

Identifies and details the parts of the engine's carburetor.

Section 6: Engine Break-In

Fuel and Glow Plug Recommendations

Advice on choosing fuel and glow plugs for engine break-in.

Fueling and Starting the Engine

Step 1: Fueling and Starting

Detailed instructions for fueling and initiating the engine.

Engine Break-In and Tuning Procedures

Step 2: Breaking In the Engine

Guides through the process of breaking in the nitro engine.

Step 3: Fine Tuning the Engine

Instructions for adjusting needle valves for optimal performance.

Section 7: Vehicle Adjustments

Step 1: Adjusting the Toe Angle

How to adjust the toe angle for steering and stability.

Step 2: Adjusting Shock Spring Tension

Adjusting spring tension for ride height and handling.

Step 3: Adjusting the Slipper Clutch

Fine-tuning the slipper clutch for acceleration and drivetrain protection.

Advanced Vehicle Adjustments

Step 4 & 5: Torsion Bars and Shock Oil

Covers removing torsion bars and changing shock oil.

Step 6, 7, 8: Linkage and Transmission

Details adjustments for brake linkage, 2-speed transmission, and shift lever.

Section 8: Maintenance Schedule

Regular Maintenance Tasks

Essential tasks for keeping the truck in optimal condition.

Section 9: Troubleshooting Guide

Radio System Troubleshooting

Solves common problems related to the radio control system.

Engine and Pull-Start Troubleshooting

Engine Start and Operation Issues

Diagnoses and resolves problems with the engine and starter.

Chassis and Drivetrain Troubleshooting

Chassis, Suspension, and Transmission Issues

Addresses common problems with the truck's chassis and drivetrain.

Warranty Information

Manufacturer Warranty Policy

Outlines the warranty coverage, terms, and service procedures.

Service and Parts Ordering

Purchasing Replacement Parts

Information on how to order replacement parts for the truck.