Xtool F1 Ultra User Manual

xTool F1 UltraProduct name
493 mm × 253 mm × 373 mmSize
220 mm × 220 mmInternal working area
10,000 mm/s
Maximum processing
speed
24 V 10 A, 240 W
Input power
455 nm blue-light laser
1064 nm fiber infrared laser
Laser module
20 W (455 nm)
20 W (1064 nm)
Laser power
Wi-Fi, USB, IP
Connection mode
Touchscreen controller
Nameplate
Start/Stop button
Framing
button
Specifications
Up/Down button for
laser module
Complies with 21 CFR 1040.10 and 1040.11 except for
conformance with IEC 60825-1 Ed. 3., as described
in Laser Notice No. 56, dated May 8, 2019.
F1 Ultra
Model: MXF-K002-B20
Input power: 24 V 10 A, 240 W
Manufactured by: Makeblock Co., Ltd.
Company address: Floor 4, Building C3, Nanshan iPark, No. 1001 Xueyuan
Avenue, Nanshan District, Shenzhen, Guangdong Province, 518000, China
Wavelength: 450±10 nm (20 W)/1064±5 nm (20 W)
FCC ID: 2AH9Q-MXFK002
IC: 22796-MXFK002
Made in China
■ Up/Down button for laser module: Lifts or lowers the
laser module during manual focusing.
■ Framing button: Starts or stops framing.
■ Start/Stop button: Starts or stops material processing.
4

Xtool F1 Ultra Specifications

General

Brand	Xtool
Model	F1 Ultra
Category	Industrial Equipment
Language	English