To Next PageTo Next Page
Need help?Do you have a question about the xtra XR10 and is the answer not in the manual?
Recommendations for safe electrical connection and use of the unit.
Guidelines for the proper disposal of refrigeration units and components.
Steps for setting up the cabinet after unpacking and initial placement.
Explanation of the control panel buttons, LEDs, and displays.
Procedure for selecting and activating the 'Soft Chill' cycle.
How the cabinet determines probe or timer mode for cycles.
Maintenance of drip tray and methods for defrosting the unit.
Adjusting cycle end time or temperature settings.
How to interrupt or stop an active cycle or function.
Notification and silencing of the end-of-cycle audible alarm.
Detailed list and explanation of controller parameters P01 through P68.
Technical specifications and dimensions for XR10 and XR20 models.
Technical specifications and dimensions for the XR35 model.
Instructions for removing the unit cover for component access.
Procedures for cleaning the condenser unit.
Steps to access the evaporator assembly and related components.
Steps for safely removing the cabinet door.
General cleaning procedures for the cabinet's interior and exterior.
Electrical wiring diagram for all XR10, XR20, and XR35 models.
Troubleshooting common safety and utility indicators and faults.
Troubleshooting common function-related faults and error codes.
Common causes and prevention of corrosion on stainless steel surfaces.
General